Skip to end of metadata
Go to start of metadata

Thanks for selecting Ascora GPS tracking for your vehicles or assets.  Once your GPS devices are installed you’ll be able to GPS tracking data right inside Ascora – including Live Tracking, Trip History and a whole range of GPS details.






Important: Take note of the Serial Number of the Device you’ll need this to identify this particular Tracker in Ascora.  The Serial Number is shown on the box and also on the Champ itself.



Step 1 - Installation

The Champ must be installed into your vehicle by an auto-electrician.  See below for a standard three wire installation.

Here’s a wiring diagram to assist in Installation:



(info) Here’s a wiring diagram to assist in Installation:



Pins 2, 6, 7 are inter-changeable grounds. 


Pins 3,4,9 and 10 are split off into a molex connector for the Driver ID.

 

Step 2 – Setup in Ascora

Now your Legend is installed and ready to go, you’ll want to adjust the details shown in Ascora.


1. Under the Tracking menu, click on Assets.


2. All of your current GPS assets will be listed – the new ones will be displayed as ASSET. Find the row matching the Serial Number installed and click on the Asset Name in the first column.


3. Adjust the Asset Code and Name as needed and click Save – this will help you find the Asset in the reports.


Tracking Menu

Here’s a quick breakdown of the features available under the Tracking menu in Ascora:


 

Assets – Defines the Vehicles you have in your fleet and the associate tracker.  Also provides an estimated Odometer and Run Time values. 

Live Tracking – See where all your Assets are right now.

Trip View – See the Trip replays and details for a particular Asset for any day.

Daily Coverage Map – See overall trip data for multiple Assets.  You can also select multiple Assets to see all Trips at once.

Manage Trips – See the Trip details over a date range for a particular Asset as a Table.  You can also jump from here to the Trip View to view them on the map.

Asset Timeline – Displays a table of all Trips for a selected Asset over a specified Timeframe.  Also allows you to jump to the Trip View to see more information on a particular Trip.

Telemetry – Displays the raw telemetry data received by Ascora – including Heartbeat values and locations and all range of hardcore GPS data.

IO Telemetry – Displays Raw Input / Output Telemetry received – such as Log Reasons, Battery and External Voltages.

GPS Settings – Area where you can define additional GPS parameters (all the important ones are already pre-set for you by Ascora) and define Geofences.



Related Article

Champ with iButton for DriverID & Immobilisation


 

  • No labels
Write a comment…